Looking for:
Arizona vortex manualArizona vortex manual.CMC Rescue AZ VORTEX User Manual
Arizona vortex manual.ARIZONA VORTEX KIT
The Vortex is ideal for use with high lines and tracking line offsets. The extra attachment points also work well for rope access where several lines may be needed over the edge. Sets for both the Raptor Feet and Flat Feet are included to provide secure footing options on varying terrain and industrial surfaces. The Flat Feet now come with an improved rubber pad that can be easily replaced when needed. Designed for ultimate accessibility and quick access, our backpack-style bags are extremely rugged and able to be carried on the back into the wilderness or an industrial environment such as stairwells.
Certificate of Completion Download your personalized Certificate of Completion after completing the course. Transformational "This course will elevate your team's performance like no other The guys Requirements. STEP 6 Test load the rigging to ensure frame Ensure the rigging is tested by applying load to the system in a stability and security. This test should be performed prior to supporting personnel in a potentially hazardous area.
Step 1: Mode of Use Fig. Support ropes directly from the head of the frame Anchor Frame fig. Support a directional pulley or pulley system on the head of the frame fig. For correct rigging, the user must know both the direction and magnitude of the force acting on the frame. For this pur- pose we have designated two primary Modes of Use:. Anchor Frame — The rope supporting the load is termi- nated anchored to the Vortex figures 1a and 1b.
Anchor frame Fig. The following diagrams are a guide to identifying the Ten- dency of Movement of the head and the feet of the frame. The frame outward, as indicated by the red arrows. CMC applied force pulley system resul- recommends that each pair of feet be tant approaches the hobble.
The front legs of the Easel-Leg Tripod will have a tendency to spread apart and backward, while the rear leg will have a tendency to move forward. The rear leg of an Easel-Leg Tripod must be appropriately secured to control all tensile, compressive and shear sliding forces. The front legs of the Easel-Leg Tripod will have a tendency to spread apart, while the rear leg will have a tendency to move backwards.
The securing cy of movement. The head is typically secured through a methods and rigging must resist all tensile, compressive and combination of legs in compression, legs in tension and guys shear sliding forces transferred to the feet via the legs and in tension.
Care must be taken to ensure that will resist the forces applied to the Vortex frame, such as solid all components used are able to resist the forces applied with ground or substantial structural members.
The feet can be the required factor of safety or safety margin. The number secured in numerous ways, including but not limited to: and position of guys is dependent on the Vortex configura- tion and its intended function. Connect the legs together using independent hobbles between each pair of feet.
Bolted to solid surfaces or structure. Lashed to objects. CMC recommends the following criteria for choosing additional guying material: 1 2 1. Very Low Elongation. However, under the Vortex frame. If however, to allow the user to quickly ensure that the forces these rules are met, the magnitude of the force on the guy are within and acceptable range, the following rules-of- will not exceed that of the applied force. In some configurations there may be multiple guys support- ing the Vortex.
It is essential that the user properly identify which guyline will resist the Tendency of Movement of the Vortex. It is this guyline or Guy Plane if multiple guylines are used that must meet the Guy Angle Rules described in this 1.
Guy Angle section. The Guy Angle directly E. ES GU. IED F. The guy angle directly opposes the Applied Force Angle and is the angle formed between the Gin Pole and the guyline. ORC Y. B Fig. The results of the testing prove that equal to that specified for the application, in the direction the Vortex can be safely used to support personnel in a wide permitted by the system when in use.
The are used. Ways to maximize the strength and stability of the Vortex are:. Ensure mid-span leg connections are loaded axially. Do not allow objects or structures to contact the legs mid-span.
Configurations - Carefully plan and select the most appropriate rigging On the following pages is a simple guide to the most equipment and techniques. Each of the following standard configurations has specific attributes, rigging requirements and usage guidelines that should be followed.
Other, more complex configurations require advanced rigging skills and expert evaluation prior to being placed in service. Directional Frame. In this case, the hobbles form a triangle between the feet. Ideally the load should be suspended in the center of the triangle. As the load is moved away from the center of the triangle the Tripod will have a tendency to topple.
Care must be taken to ensure that the load is kept in the center of the trian- gle. Additionally, keep the haul line close to the load line to prevent tendency of movement on the head of the frame. B Load line. The use of hobbles alone is normally considered accept- able to secure the feet in this configuration.
Next Page. Page 2 Head Set, providing a wide range of adjustment. On the A-frame and easel A-frame application, at least two pulleys can now be attached directly into the Head Set without carabiners, eliminating lost headspace and working clearance.
CMC Rescue, Inc. Use the heel of your boot on each Raptor Foot to firmly press the foot into the soil. This creates a horizontal force vector that will attempt to topple the tripod. An A-frame and a Gin Pole provide options where the full tripod configuration cannot be adapted to the location.
Several attempts at getting it right may be needed before tie down commences. Page 9 Line red is pulled from outside of the tripod base, the resultant force vector will try to topple the tripod, Figure 6.
❿
Comments
Post a Comment